Hooks For Everything. Holes For Nothing.
Every new tool shouldn't mean a new hole in the drywall. Slatwall is one continuous panel system mounted straight into your studs — rated up to 300 lbs per square foot — so bikes, ladders, and power tools all hang off the same track instead of a wall full of mismatched anchors.
Three Ways to Hang Things on a Wall
Every garage ends up with something on the wall eventually. Only one of these options is actually built to hold garage-weight gear long-term.
Screws & Drywall Anchors
Works for a season, then the anchor pulls loose the first time something heavy swings off it. Every new item means a new hole — and eventually a wall full of them.
Standard Pegboard
Better than bare drywall, but it's built for hand tools and light household use. It's thin hardboard — not rated for a mounted bike, a ladder, or anything with real weight to it.
Strux Heavy-Duty Slatwall
Panels mount directly into wall studs as one continuous system, rated up to 300 lbs per square foot. Hooks and brackets lock into the track — nothing to drill, nothing to patch later.
One System, Not a Patchwork
The difference between slatwall and a wall full of individual fixes comes down to how it's mounted and what it's made of.
One Continuous Panel Run
Panels run 15" tall by up to 96" long, secured with a steel-reinforced install strip mounted into your wall studs — not just screwed through the panel face into drywall. That's what the full weight rating depends on: hung correctly on studs with the install strip system, not eyeballed and screwed up on a Saturday.
Hooks, Not Holes
Every hook, basket, and bracket locks into the same horizontal groove — no drilling, no mollies, no drywall anchors for each new item. Want to rearrange the whole wall next season? Unclip and move things, no patching required.
Solid PVC, Not Wood
Even the wood-look finishes are a surface treatment on solid, waterproof thermoplastic underneath — not real wood, and not the melamine-and-particleboard construction that swells and delaminates in a garage. It won't warp, rot, or absorb moisture the way a wood-based panel system would.
Installed, Not Guessed
Mounted correctly, on the right install strip for the panel duty rating, into verified stud locations. A rated system only holds its rating when it's put up the way it's designed to be — that's the install part we handle.
What You're Actually Getting
| Panel Size | 15" tall, in 4' and 8' lengths |
|---|---|
| Weight Rating | Up to 300 lbs per square foot (Heavy Duty tier) |
| Material | Solid, waterproof PVC — won't warp, rot, or absorb moisture |
| Mounting | Steel-reinforced install strip, secured to wall studs |
| Finishes | Barnwood, Whitewood, and additional colors available |
Trim and mounting bracket quantities are calculated for your specific wall run during your design — not guessed after install day. Weight ratings assume correct installation on the matching install strip; we handle that as part of every job.
Built to Match What You're Actually Storing
The hooks and brackets get matched to your gear during the design, not picked off a shelf at random.
- Standard Hooks & BasketsThe default for hand tools, extension cords, sports gear, and general everyday storage.
- SteadyRack Pivoting Bike MountsWall-mounted bike storage that pivots flat against the wall when not in use — built for households with more bikes than floor space.
- GarageSmart Motorized LiftersOverhead platform lifts for totes, seasonal gear, or an extra bike — mounted above the slatwall line so the wall itself stays clear.
- Vertical Storage for Odd-Shaped GearGolf bags, skis, and ladders get dedicated brackets instead of getting shoved into whatever gap is left.
Matched to the Rest of Your Garage
Slatwall in Actual Boise Garages
From Wall to Hung Up
Free Consultation
We measure your wall runs and talk through what's actually going up — bikes, tools, seasonal gear — so the hooks match the load.
Custom Layout
Panel count, trim, and hook bundle get specced to your exact wall, not a generic kit.
Install in a Day
Panels mount to studs, hardware included, ready to hang things the same day.
Slatwall FAQ
What is slatwall, and how is it different from pegboard?
Slatwall is a heavy-duty panel system that mounts directly to the wall, with horizontal grooves that hooks, baskets, and brackets slide into and lock onto. Pegboard uses small holes in thin hardboard and is only rated for light household items. Slatwall panels are rated up to 300 lbs per square foot, so it can carry real garage gear — bikes, ladders, power tools — not just hand tools.
Do I need cabinets too, or can I just get slatwall?
Slatwall works on its own or alongside cabinets. It's a common starting point for a smaller budget or a single wall, and cabinets can be added later without redoing the slatwall. Most full garage designs combine both — cabinets for enclosed storage, slatwall for anything you want to see and grab quickly.
What accessories work with the slatwall system?
Standard hooks and baskets cover most tools and general storage. For bikes, we typically spec SteadyRack pivoting wall mounts, which fold flat against the wall when not in use. For heavier or overhead needs — totes, seasonal gear, extra bikes — GarageSmart motorized platform lifters mount above the slatwall line and free up the wall entirely.
How much weight can slatwall actually hold?
The panels themselves are rated up to 300 lbs per square foot. Actual capacity at any single point depends on the hook or bracket you're using, since different accessories distribute weight differently. We match hooks and brackets to what you're actually hanging during your consultation, so nothing is guessed after the fact.
What colors does slatwall come in?
Slatwall panels are available in finishes including Barnwood and Whitewood, with additional colors available. You'll see physical samples before your layout is finalized so the finish matches the rest of your garage.
Is slatwall made of wood?
No. Even finishes like Barnwood and Whitewood that look like wood grain are a surface treatment on solid, waterproof PVC underneath. That matters in a garage specifically — it won't warp, rot, or absorb moisture the way a wood-based or particleboard panel system would over time.
Do I need to patch a bunch of holes if I ever want it removed?
Slatwall panels mount into wall studs as one continuous system, so you're not left with a scatter of drywall anchor holes the way you would be from years of hanging things individually. It's a single mounted surface, not a patchwork of fixes.
Ready to Get Everything Off the Floor?
Free consultation, real measurements, hooks matched to what you actually own — not a generic kit.
Boise Garage Titan is an Authorized Strux Garage Dealer. Learn more about Strux Garage Cabinets ↗