Most "garage cabinets" are kitchen cabinets adapted for a room they were never built for — same shallow depth, same weight limits, same materials that swell in the cold. Strux Garage Cabinets are engineered from the ground up for garage life and manufactured right here in Caldwell, Idaho, and Boise Garage Titan installs them across the Treasure Valley.
Every garage cabinet on the market falls into one of three categories. Only one of them is actually built for a garage.
Durable and cheap — the Home Depot or Costco entry point. But everything you own sits out in the open. It's called "visual clutter" for a reason: you can see it, which means everyone else can too.
What roughly 90% of the market uses, including big national brands. It's plastic glued onto low-grade particle board with exposed seams and edge banding. Fine inside a kitchen. In a garage, ambient moisture breaks the glue down and the cabinet starts to sag and swell — it just wasn't built for this room.
Dense MDF, heated to draw moisture out, electrostatically charged, and baked in an infrared oven — fully encapsulated with zero exposed seams. This is the only one of the three actually engineered for a garage.
This is the part most companies skip, because it's the part that actually explains why the price is what it is.
A dado joint is a groove cut into one panel that a second panel slides into — similar to how LEGO bricks lock together. It matters because the weight of the cabinet gets distributed across the entire joint, instead of resting on a single cam lock or pin the way modular or IKEA-style furniture is built. If one pin fails on a cam-lock cabinet, the whole thing is compromised. A dado-jointed cabinet doesn't have that single point of failure — it stays square and doesn't sag, year after year.
Every component — fronts, sides, tops, bottoms, backs, and shelves — gets the same powder coat finish, not just the parts you can see. No glued-on melamine, no exposed edge banding, no seams for moisture to work into. That's why these cabinets don't swell, delaminate, or fail at the seams the way most garage cabinets eventually do.
Cabinets mount to a steel rail fastened into every stud, 16 inches on center, with cabinets secured to the rail at every pre-drilled point. This is what actually carries the load — not drywall anchors, not glue.
Custom-fit leveling legs keep the cabinet run square even when your garage floor isn't perfectly flat — which, if you've ever set foot in a garage, it never is.
Kitchen cabinets are sized for plates and cereal boxes. These are sized for tools, totes, and a full-size gun safe.
| Type | Max Height |
|---|---|
| Tall cabinets | 92" max |
| Bases & uppers | 18" min – 48" max |
| Type | Max Depth |
|---|---|
| Tall cabinets | 32" |
| Base cabinets | 32" |
| Upper cabinets | 32" (20"–24" needs one-side support, 24"–32" needs support on both sides) |
| Safe storage cabinets | Up to 36" |
| Type | Max Width |
|---|---|
| Tall, 2-door / Tall Max 4-door | 48" |
| Tall, single door (incl. Tall Max 2-door) | 25" |
| Base/upper 2-door, no divider | 36" |
| Base/upper 2-door, with divider | 48" |
| Base/upper, single door | 25" |
| Max Width | Max Depth |
|---|---|
| 32" | 24" (cabinets deeper than 24" get 24"-deep drawers) |
| Component | Elite | Elite Floating (No Legs) |
|---|---|---|
| Base & Tall cabinets | 500 lbs / cabinet | 300 lbs / cabinet |
| Upper (wall) cabinets | 75 lbs / cabinet | 75 lbs / cabinet |
| Drawers | 75 lbs / drawer | 75 lbs / drawer |
| Shelves | 100 lbs / shelf | 100 lbs / shelf |
Ratings apply when properly installed with weight evenly distributed. Store heavier items lower.
| Type | Max Depth | Max Length |
|---|---|---|
| Standard butcher block | 25" | No max (spans over 92" spliced with draw bolts) |
| Island butcher block | 39" | 72" (cannot be spliced) |
| Powder-coated countertop | 39" | 92" (cannot be spliced) |
Need deeper than 25" and longer than 72"? That's where a powder-coated countertop takes over from butcher block.
Garage walls are almost never perfectly square. Here's how a proper install accounts for that instead of pretending it isn't true.
Every project ends with real samples in your hands before anything gets finalized.
Not a "lifetime of the product" warranty with an asterisk. Here's exactly what's covered.
Cabinet boxes, doors, shelves, and steel mounting rails — against cracking, warping, delamination, and structural failure under rated load.
Every powder-coated surface, every panel — against peeling, blistering, and adhesion failure, including normal garage humidity and seasonal temperature cycling.
Hinges, drawer slides, handles, and mechanical hardware, from the date of installation.
Every Strux cabinet installed in your garage was manufactured in Caldwell — not shipped from overseas, not trucked in from a factory three states away. That's a shorter supply chain for parts and replacements, and it's Treasure Valley dollars staying in the Treasure Valley. When we say these are built for Idaho garages, we mean it starts with where they're actually built.
Every photo below is a real Boise Garage Titan project.
We walk your garage, talk through how you actually use the space, and take real measurements — no rushed guesswork.
A layout built around your exact walls, your gear, and your budget — with a 3D preview before anything's finalized.
Pre-drilled, hardware included, crated and organized by project. Most installs wrap in one to two days.
No, at least not the ones we install. Most garage cabinets on the market really are kitchen cabinets adapted for the garage — same shallow depth, same weight limits, same materials that swell and delaminate in temperature swings a kitchen never sees. Strux Garage Cabinets are sized for garage life instead: up to 32" deep (36" for cabinets built to house a safe), rated up to 500 lbs per cabinet, and fully powder coated for scratch and fade resistance in an unheated garage.
Most national garage cabinet brands — roughly 90% of the market — use melamine construction: plastic laminate glued onto particle board, with exposed seams and edge banding. It's fine inside a kitchen, but ambient garage humidity breaks the glue down over time and the cabinet starts to sag and swell. Strux Garage Cabinets use fully powder-coated dense MDF with dado joinery instead, built specifically to hold up in a garage.
A dado joint (pronounced "DAY-doh") is a groove cut into one panel that a second panel slides into, similar to how LEGO bricks lock together. It matters because the cabinet's weight gets spread across the whole joint instead of resting on a single cam lock or pin — the way modular or IKEA-style furniture is built. That's why a dado-jointed cabinet stays square and doesn't sag over time.
Base and tall cabinets are rated to 500 lbs each (300 lbs for wall-mounted Elite Floating units with no legs). Upper wall cabinets hold 75 lbs, drawers hold 75 lbs each, and shelves hold 100 lbs each — assuming proper installation and evenly distributed weight.
Standard base, tall, and upper cabinets run up to 32" deep. We also build dedicated cabinets up to 36" deep specifically to house a gun safe.
Contact us or [email protected] with proof of purchase, install date, and dealer name, plus photos or video, within 90 days of noticing the issue. Defective components are repaired or replaced at no material cost. Labor, removal, and reinstallation aren't covered under the warranty itself, but as your installer we'll walk you through next steps. Full terms are available in the warranty PDF.
Popular cabinet colors include Platinum and Pewter, with additional colors available. Slatwall comes in finishes like Barnwood and Whitewood, and hardware is available in brushed nickel, matte black, and matte gold. You'll see and choose real samples before your design is finalized.
Free consultation, real measurements, a design built around your space — not a stock layout.